Mazzer GRINDER-DOSER MIN User Manual page 12

Grinding system
Remove the safety screw which prevents the adjustment disk from being removed.
Unscrew the adjustment disk by turning it clockwise. Having removed the upper
grinding blade holder, clean the grinding blades, threads and the entire grinding
system thoroughly using a clean brush and cloth.
Having refitted the upper grinding blade holder in the relevant slot, screw the adju-
stment disk back on, put the self-locking screw back in whichever of the two holes
on the disk enables the best adjustment and, having refitted the hopper and secu-
red, adjust the grinding as required.
Doser (Coffee grinder-version)
Having discharged the ground coffee, clean the doser's star unit with a clean brush,
expelling the material removed by pulling the doser lever.
Use a dry cloth to thoroughly clean the outlet of the ground coffee on the bot-
tom of the doser.
When a more thorough cleaning is required, the operation must be performed
only by skilled technical personell, after disconnecting the appliance from
the power supply, according to the following instructions:
1. Remove the coffee outlet guard unscrewing the relevant screws;
2. Unscrew the hexagonal-head screw that fix the coffee dose adjustment knob;
3. Unscew (anticlockwise) the coffee dose adjustment knob holding the doser's
stars unit (female dosing star and the upper dosing star) pushed down;
4. Remove the doser's stars unit;
5. Remove the central spring;
6. Clean thoroughly the bottom of the doser, especially the sharp edges on sight
and the outlet of the ground coffee.
In order to reassemble the doser, follow the previous instructions in inverted
order; pay attention that the feather of the coffee-outlet covering section plate is
correctly set in the proper slide on the side of the basin.
Spout (Coffee grinder with bag holder)
Wipe clean the spout from which ground coffee is released using a dry cloth.
All right reserved. It is prohibited to reproduce, adapt or translate this document
without prior written authorization.
First Editon: 2001
Last revised: SJ07 07/2009
12