Mazzer GRINDER-DOSER MIN User Manual page 6

ADJUSTING GRINDING
In order to achieve finer or coarser grinding, the adjustment disk located under the hop-
per must be adjusted using the relevant
handle.
In order to increase the coarseness of
the ground coffee, the disk must be
rotated clockwise; to decrease, turn the
disk anticlockwise.
The disk remains in the chosen position
without having to be locked in place.
The adjustment must be performed with the motor on, and preferably without any
coffee between the grinding blades.
Grind small amounts of coffee in order to determine the optimal degree of fineness.
In the grinder-doser version, if the coffee comes out of the espresso coffee machi-
ne very quickly, it means the coffee is ground too coarse.Vice versa, if it comes out
too slowly, it means the coffee is ground too fine. Nonetheless, bear in mind that
there are many conditions liable to influence the correct supply, such as the wei-
ght of the portions, the compacting, the espresso machine settings, and the clea-
ning of the filters.
COFFEE DOSE ADJUSTMENT
(grinder-doser version)
In order to adjust the size of the portion dispensed, the small knob located in the
centre of the ground coffee storage container must be turned while holding still
the star shaped dosing unit.
INCREASE THE DOSE
(turn anticlockwise)
REDUCE THE DOSE
(turn clockwise)
6
COARSER GRINDING
COFFEE DOSE ADJUSTMENT
FINER GRINDING
COLLECTING THE DOSE