Maintenance; Cleaning The Appliance - Mazzer GRINDER-DOSER MAJOR User Manual

ENGLISH

13) MAINTENANCE

It is essential to check the state of the supply cable and plug periodically.
IN THE EVENT THE SUPPLY CABLE OR PLUG ARE DAMAGED, CALL IN
SKILLED TECHNICAL PERSONNEL TO REPLACE THEM, THIS TO PREVENT
ANY RISK.
IN - CERTIFIED APPLIANCES, A SPECIAL TOOL IS REQUIRED TO OPEN
THE BASE PLATE TO GET AT THE CABLE.
It is recommended to use original spare parts only.
In order to assure the lasting efficiency of the appliance, skilled technical person-
nel must be called in to perform periodical maintenance, including detailed checks
of the state of those components subject to wear.
The state of the grinding blades must be checked periodically. Keeping the grind-
ing blades in an excellent state assures high-quality grinding, resulting in greater
productivity and limited overheating.

14) CLEANING THE APPLIANCE

DISCONNECT THE APPLIANCE'S POWER SUPPLY BY UNPLUGGING IT
BEFORE CLEANING.
THE APPLIANCE MUST NOT BE CLEANED USING WATER JETS.
Do not install the appliance in rooms where water jets are used for cleaning.
THE APPLIANCE MUST BE CLEANED PERIODICALLY BY SKILLED TECHNI-
CAL PERSONNEL ONLY.
Use perfectly clean, disinfected cloths or brushes for cleaning.
Do not use abrasive products as these are liable to take the sheen off shiny parts.
Hopper
Wash the hopper once it has been removed from the appliance, using neutral soap
and water, rinse abundantly with lukewarm water and dry thoroughly.
It is advisable to clean the hopper periodically.
Once the hopper has been cleaned it must be put back on the appliance proper-
ly, fixing it with the relevant pin.
Grinding system
Unscrew the adjustment disk by turning it clockwise. Having removed the upper
grinding blade holder, clean the grinding blades, threads and the entire grinding sys-
tem thoroughly using a clean brush and cloth.
11