Canon DC20 Instruction Manual page 75

~~~9)
I
~} I~I
D. EFFECT OFF
1. Set the camcorder to record movies ([CAMERA·-").
2. Upload a sample image from the supplied disc to the memory card.
Refer to Adding Still/mages from Your Computer to the Memory Card in the Digita/
Video Software instruction manual.
3. Move the mode switch to a position other than
fD).
4. Press the FUNC. button.
5. First, select (.... T ) the current digital effects symbol from the left side
column and then select ( ........ ) the [lIt CARD MIX] option from the
bottom bar and press
(8 ).
6. Select
(.A.T)
the [IMAGE SELECT] option, and then select ( ........ ) the
still image you want to combine.
• The still image will be displayed' briefly.
• Only still images recorded on the memory card can be selected for the Card Mix
function, regardless of the current media selection for stilt images.
7. Select
(.A.T)
the [MIX TYPE] option, and set (........ )
a
mix type
appropriate for the image you selected.
If you selected [C.ANIMATION], select
(J;.~)
[ANIMAT.TYPEj and set ( ........ ) the
animation type preferred.
8. If you want to adjust the mix level, select
(.A.T)
[MIX LEVEL] and set
(........ ) the level preferred.
9. Press (8) to save the settings and press the FUNC. button to close
the menu.
"m"
appears.
10.Press the D.EFFECTS button.
"m "
turns green and the combined image appears.
o
Turn off the digital effects [D. EFFECT OFF] when you are not using them.
o
The camcorder retains the setting last used even if you turn off the digital effects
or change the recording program.
o
The image quality may be slightly lower with digital effects.
-
75