Canon DC20 Instruction Manual page 125

Problem Solution CO
Sound is distorted.
When recording near loud sounds (such as fireworks or
-
concerts), sound may become distorted. This is not a
malfunction.
A vertical light bar appears on Bright light in a dark scene may cause a vertical light bar
-
the screen. (smear) to appear. This is not a malfunction.
Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 24
Cannot edit or delete scenes. Remove the disc protection. 90
Scenes cannot be deleted in a DVD-R disc or a DVD-RW disc
-
recorded in VIDEO mode.
You cannot edit or delete scenes on a disc that was protected
-
in another digital device.
Cannot add scenes to the
The disc is full ("
e>
END" flashes on the screen). Delete some
31
playlist. recordings (DVD-RW in VR mode) to free some space or 87
replace the disc.
Cannot divide the scene. You cannot edit or delete scenes on a disc that was protected
-
in another digital device.
Cannot edit the disc title. You cannot add a title to a DVD-R disc after it was finalized. 98
You cannot add recordings or edit the disc title on a DVD-RW 101
disc after it was finalized. Unfinalize the disc first.
You may not be able to edit the title if you entered it with
-
another digital device.
Disc is protected. Cancel the disc protection or replace the 90
disc.
Cannot create a Photomovie
There are no still images recorded on the disc.
-
scene.
The disc is full ("
e>
END" flashes on the screen). Delete some 31
recordings (DVD-RW in VR mode) to free some space or 87
replace the disc.
Playback
Problem Solution
[IJ
Pressing the playback button Set the camcorder to
IPLAY···~l
. 39
does not start playback.
Load a disc. 31
You may not be able to play with this camcorder discs
-
recorded or edited with other DVD recorders or computer DVD
drives.
Verify that the disc is inserted with the label side facing up.
31
During playback there is The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 133
video noise, the sound is
You may not be able to play with the camcorder discs
-
distorted orthe disc cannot be
recorded or edited with other DVD recorders or computer DVD
read.
drives.
Image will not appear on the
Check the connections and make sure the TV or VCR is set to
102
TV screen. the correct input signal.
There is a brief stop between Depending on the DVD player, there might be a very short
-
scenes. stop between scenes during playback.
Disc is running, but image will
TVNlDEO selector on the TV is not set to VIDEO. Set the
102
not appear on the TV screen. selector to VIDEO.
You attempted to play back or dub an incompatible disc. Stop
-
playback/dubbing.
No sound from the built-in Speaker volume is turned off. Adjust the volume from the 43
speaker.
[SYSTEM SETUP] menu in the
(PLAY"~)
mode.
-I
(3
t::
0-
lD
•..>
-
125