Advertisement
Quick Links
Advertisement
Related Manuals for Zigen ZIG-AVX-201
Summary of Contents for Zigen ZIG-AVX-201
-
Page 1: User Manual
HDMI over CAT-5 Uncompressed Extender All ZIGEN products have been field tested and installer approved! User Manual ZIG-AVX-201 TECHNICAL ASSISTANCE Technical Support： Telephone (818) 654-5252 Technical Support Hours： 8:00 AM to 5:00 PM Monday thru Friday, Pacific Standard Time. - Page 2 Write To： ZIGEN INC. 6934 CANBY AVE. SUITE 107 RESEDA, CA. 91335 http://www.zigencorp.com support@zigencorp.com Notice ZIGEN Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. © 2011 ZIGEN Inc., All Rights Reserved All trademarks are the property of their respective companies.
- Page 3 Features Transmitter Unit Panel Layout Transmitter Unit Panel Descriptions Receiver Unit Panel Layout Receiver Unit Panel Descriptions Connecting and Operating Specifications Warranty Compliance...
- Page 4 INTRODUCTION The HDMI over CAT-5 Uncompressed extender The HDMI over CAT-5 Uncompressed Extender sends HDMI signals over just one CAT-5 cable -- up to 330 feet away. The HDMI over CAT-5 Uncompressed Extender supports HDMI 1.3 and HDMI 1.4 with 3D function and Full HD 1080p/60 resolution. DVI-D 1920x1200 Computer video can also be transmitted by using a DVI-to-HDMI converter cable.
- Page 5 FEATURES Features Built in HDMI selector 2x1 ● 3D Function Support ● Variable line level audio output for local or remote AMP. ● Audio and video are transmitted digitally over the CAT-5 cable with ● no signal loss. Signal Link Range: 1080p/60 and 1920x1200. ●...
- Page 6 (1) ZIG-AVX-201 HDMI over CAT-5 Uncompressed Transmitter x 1 (2) ZIG-AVX-201 HDMI over CAT-5 Uncompressed Receiver x 1 (3) IR Remote control x 1 (4) IR Emitter cable x 2 (5) IR Receiver cable x 2 (6) 5V DC Power Supplies for Transmitter and Receiver x 2...
- Page 7 TRANSMITTER UNIT PANEL DESCRIPTIONS IR: This unit is designed to control HDMI sources & volume with included IR remote controller. HDMI Source Indicator: This LED indicator will show which HDMI source input is selected. Power LED: This LED indicator will activate once the included 5V DC power adapter has been properly connected between the Transmitter unit and an open wall power socket.
- Page 8 this input port. RJ45 Port: Please connect a CAT-5 cable between this port and the RJ45 port of Receiver unit. Left / Right Stereo Port: Please connect Left / Right Stereo cable between these ports and stereo Amplifier. IR Receiver Port: Please connect provided IR Receiver cable to this port IR Emitter Port: Please connect provided IR emitter cable to this port and stick IR emitter module on the IR receiver zone of...
- Page 9 Receiver Back Panel Layout...
-
Page 10: Receiver Unit Panel Descriptions
RECEIVER UNIT PANEL DESCRIPTIONS IR: This is designed for control HDMI sources & volume with included IR remote controller. Power LED: This LED indicator will activate once the included 5V DC power adapter has been properly connected between the Transmitter unit and an open wall power socket. Link LED: This LED indicator will activate once Cat-6 cable has been... -
Page 11: Connecting And Operating
properly connected between the Transmitter unit and Receiver unit. Power input Port: Connect the included 5V 2.5A DC power supply to this input port. RJ45 Port: Please connect a CAT-6 cable between this port and the RJ45 port of Receiver unit. IR Receiver Port: Please connect provided IR Receiver cable to this port IR Emitter Port: Please connect provided IR emitter cable to... - Page 12 Connect HDMI cable between the HDMI input port of display and the HDMI output port of Receiver unit. Connect Cat-5 cables between the RJ45 port of Transmitter and Receiver unit. Connect the included 5V DC power supplies to both Transmitter and Receiver units. Power on the output device first, and the source device secondly.
- Page 13 Method 3 – RS-232 Please connect RS-232 Cable between RS-232 Port of Transmitter or Receiver and PC. Please see below command code of switching sources. Please note this command code is based on “hexadecimal system” Command Code Description 2001202020200d HDMI Input 1 2002202020200d HDMI Input 2 How to adjust Audio volume...
- Page 14 Method 2 – RS-232 Please connect RS-232 cable between RS-232 Port of Transmitter or Receiver and PC. Please see below command codes to adjust volume. Please note this command code is based on “hexadecimal system” Volume Volume Command Code Command Code Level Level 2003200020200d...
-
Page 15: Specifications
2003201720200d 2003203720200d 2003201820200d 2003203820200d 2003201920200d 2003203920200d 2003201A20200d 2003203A20200d 2003201B20200d 2003203B20200d 2003201C20200d 2003203C20200d 2003201D20200d 2003203D20200d 2003201E20200d 2003203E20200d 2003201F20200d SPECIFICATIONS PERFORMANCE HDTV Resolutions 480p,720p,1080i,1080p Standard TV Resolution 480p,720p,1080i,1080p Maximum HDMI Cable Distance 2.0M Video Bandwidth 10.2Gbps Input Video Signal 480p,720p,1080i,1080p Input DDC Signal 5 Volts(TTL) I/O CONNECTORS Transmitter... - Page 16 Outputs 1 HDMI-A 19PIN Socket 1 RS-232 Connector 1 3.5mm Jack-IR Emitter MECHNICAL Transmitter Dimensions (H-W-D) 19 X 11.5 X 3 cm Weight 0.8kg Receiver Dimensions (H-W-D) 13 x 9.5 x 3 cm Weight 0.6kg WARRANTY Limited Warranty 1 Year Parts and Labor ENVIRONMENTAL Operating Temperature +0 to +40°...
- Page 17 The proof of sale is required in order to claim warranty. Should this product, in ZIGEN’s opinion, prove defective within this warranty period, ZIGEN, at its option, will repair or replace this product without charge. Customers outside the US are responsible for shipping charges to and from ZIGEN.
- Page 18 The technical information contained herein regarding the features and specifications is subject to change without notice. COMPLIANCE ZIG-AVX-201 HDMI over CAT-5 Uncompressed extender has been tested for compliance with appropriate FCC rules and regulations and is also RoHS compliant.