Zigen ZIG-POC-100 User Manual

Hdbaset hdmi extender

Advertisement

Quick Links

ZIG-POC-100
HDBaseT HDMI Extender
1

Advertisement

Table of Contents
loading

Summary of Contents for Zigen ZIG-POC-100

  • Page 1 ZIG-POC-100 HDBaseT HDMI Extender...
  • Page 2 Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Page 3 Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen.
  • Page 4 Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 8:00AM - 5:00PM (PST) Email info@zigencorp.com www.zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 6934 Canby Avenue Suite 107 Reseda CA 91335...
  • Page 5 Features  Supports 4K/UHD/60Hz/4:4:4  Supports HDMI2.0 & HDCP2.2, and is backward compatible to the previous version  Maximum transmission distance is up to 70m for 4Kx2K, and 100m for 1080p  Supports CEC, IR and RS-232 pass-through for long-distance control ...
  • Page 6 Specifications Function HDMI HDMI A-Type Female x 1 Connector RJ-45 RJ-45 Jack x 1 Connector RS232 DB9 Female x 1 Connector 3.5ψ Stereo Jack x 1 IR IN 3.5ψ Stereo Jack x 1 IR OUT LED x 3 DC Jack 12-v 12-v Max.
  • Page 7 Zigen or your reseller. © 2017 Zigen, Corp. All Rights Reserved. All trademarks are the property of their respective owners. Zigen, Corp. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
  • Page 8: Table Of Contents

    Table of Contents Introduction Introduction ……………………..…………….…………………… Transmitter Front Panel ............10 Transmitter Back Panel ............. 11 Receiver Front Panel ..............12 Receiver Back Panel ..............13 Get Started Installation …………………………………………………………… 14 System Diagram ……………………………………………..…….. 15 Connection IR Receiver Cable Directions ............. 16 HDMI Connector Signal Pin Out ..........
  • Page 9: Introduction

    Introduction The ZIG-POC-100 is an ultra-thin HDMI2.0 Extender consist of transmitter and receiver. It extends 1080p/4K HDMI signal over CAT-6a cable up to 100m /70m (PoC), and enables IR and RS-232 pass-through to control source or display device remotely. This extender is equipped with visually lossless video compression technology (VLC) to ensure HD lossless transmission of HDR-10 and 4K@60Hz/4:4:4 over CAT-6a cable.
  • Page 10: Transmitter Front Panel

    Transmitter Front Panel POWER - blue LED light LINK - blue LED light HDCP - blue LED light...
  • Page 11: Transmitter Back Panel

    Transmitter Back Panel 12-V DC Support bi-directional PoC. HDBT Connect using a CAT-6a cable. IR OUT Connect IR Emitter to send IR signal to source device. IR INa Connect to 3 party control processor IR out to control display device. RS-232 Connect an RS-232 cable from this port to an RS-232 device.
  • Page 12: Receiver Front Panel

    Receiver Front Panel POWER - blue LED light LINK - blue LED light HDCP - blue LED light...
  • Page 13: Receiver Back Panel

    Receiver Back Panel 12V DC Support bi-directional POC. HDBT Connect using a CAT-6a cable. IR OUT Connect IR Emitter to send IR signal to TV / Display. IR IN Uset provided IR receiver to control remote source devices. RS-232 Connect an RS-232 cable from this port to an RS-232 device. HDMI OUT Connect to HDTV Display.
  • Page 14: Installation

    Installation Be sure to turn OFF source and TV. Connect the HDMI extension cable between HD Source and HDMI In port of the Transmitter. Connect the HDMI extension cable between the HDTV and the HDMI Out port of the Receiver. Connect Cat-6a cable between the Transmitter Link port and the Receiver Link port of the Receiver.
  • Page 15: System Diagram

    System Diagram...
  • Page 16: Ir Receiver Cable Directions

    IR Receiver Cable Directions Plug the IR receiver into the ZIG-POC-100-Tx “IR IN” port and place the IR receiver so you can point to it easily with your IR remote controller. The IR receiver is designed to work on the “Rx” receive side of the extender.
  • Page 17: Hdmi Connector Signal Pin Out

    HDMI Connector Signal Pin Out Signal Signal TMDS Data 2+ TMDS Clock Shield TMDS Data 2 Shield TMDS Clock - TMDS data 2 - TMDS Data 1+ Reserved (N.C. on device) TMDS Data 1 Shield TMDS Data 1 - TMDS Data 0+ DDC/CEC Ground TMDS Data 0 Shield +5 power...
  • Page 18: Rj-45 Wiring Information & Coding

    RJ-45 Wiring Information & Coding Looking into connector RJ-45 Plug Conductor Identification Assignment Color Code for Conductor White-Blue Pair 1 Blue White-Orange Pair 2 Orange White-Green Pair 3 Green White-Brown Pair 4 Brown...
  • Page 19: One-To-One System Connection Example

    One-to-One System Connection Example...

Table of Contents