Uncompressed 4k@60hz 4:4:4 hdmi extender over fiber (14 pages)
Summary of Contents for Zigen ZIG-CX-100
Page 1
ZIG-CX-100 Model No Operating Instructions Thank you for purchasing this product. Please be sure to read the instruction manual carefully.
Page 2
Introduction The ZIGEN ZIG-CX-100 is a transmitter / receiver extender kit for long distance transmission of HDMI video and embedded audio plus bi-directional control signals over a single Coaxial cable. The ZIG-CX-100 can be used as a point-to-point solution or integrated with Matrix switching equipment to extend inputs or outputs to remote locations.
HDMI Extender (By single coax cable) Product Overview ■ ( Model Number: ZIG-CX-100 ) Features ■ Extend HDMI signal by using a single RG-6QUAD coaxial • cable. 1080p/24Hz with 3D up to 330-ft/100 meters or 1080p/60Hz up to 330-ft / 100-meters.
Page 6
..§ Notice ZIGEN, Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. Warning To reduce the risk of fire, electric shock or product damage: 4. Clean this apparatus 1. Do not expose this apparatus only with dry cloth.
3) Connect the HDMI sink ( such as HD-LCD、HD-DLP) to ZIG-CX-100 Rx. 4) Connect the IR TX UNIT into ZIG-CX-100 Rx (IR TX); Connect the IR RX UNIT into ZIG-CX-100 Tx (IR RX). Attention: Please insert and extract cables gently.
Page 8
※DIP switch setting instruction: ZIG-CX-100 Tx Position1 Function Transfer video with AUTO mode The input signal after processed output. Position2 Function 1080P stereo (Using Embedded EDID) (note1) Trigger EDID Copy Position3 Position4 Function 1080P 3D 2CH (Using Embedded EDID) (note2)
Page 9
ZIG-CX-100 Rx Position1 Function Transfer audio for AUTO mode (note1) The input audio bypassed to output Position2 Function Output HDCP determined by the sink. Do not encrypt output Position3 Function 24 bit output Normal mode, color depth determined by the sink Note1: If audio signal is PCM 48K, The input audio will be bypassed to output.
PCM and non PCM, HD ADUIO, etc) Maximum Transmission Distance 100 meters on RG-6QUAD Maximum Transmission Distance 50 meters (SYV75-5 coax cable) Power Supply 5V/3A DC 7.5Watts (ZIG-CX-100 Tx) Power Consumption 8Watts (ZIG-CX-100 Rx) Dimensions 157mmL×118mmW×25mmH Mass (Main unit) 0.92Kg / 2.02lb (Pairs)
W NOTE1: Specifications are subject to change without notice. Mass and dimensions are approximate. Panel Descriptions ■ 1. ZIG-CX-100 Tx ① Power input 5V/3A DC ② Power indicator ③ RS232 port ④ HDMI input ⑤ HDMI input status indicator ⑥ IR RX ⑦...
Page 12
2. ZIG-CX-100 Rx ① SDI input ② SDI loop output ③ IR TX ④ EDID ⑤ IR RX ⑥ USB Port for firmware upgrade ⑦ SDI input status indicator ⑧ HDMI Output ⑨ RS232 port ⑩ Power input 5V/3A DC ⑪...
Typical Application ■ Maintenance ■ Clean this unit with a soft, dry cloth. Never use alcohol or paint thinner to clean this product. Product Service ■ ● Provided Service Damage Requiring service: The unit should be serviced by qualified service personnel if: Objects or liquids have gotten into the unit;...
The proof of sale is required in order to claim warranty. Should this product, in ZIGEN’s opinion, prove defective within this warranty period, ZIGEN, at its option, will repair or replace this product without charge. Customers outside the US are responsible for shipping charges to and from ZIGEN.
The liability of ZIGEN with respect to any defective products will be limited to the repair or replacement of such products. In no event shall ZIGEN be responsible or liable for any damage arising from the use of such defective product’s whether such damages be direct, indirect, consequential or...
Page 16
COMPLIANCE The ZIG-CX-100 HDMI over Single coax Extender has been tested for compliance with appropriate FCC and CE rules and regulations and is also RoHS compliant. The Power Adapter has been tested for compliance with UL, CE and CSA rules and regulations and is also RoHS compliant.