Uncompressed 4k@60hz 4:4:4 hdmi extender over fiber (14 pages)
Summary of Contents for Zigen ZIG-PAX
Page 1
Zigen ZIG-PAX Premium Digital / Analog Audio Extender 4K 60 Hz 4:4:4 HDCP 2.2 ZigNet, Full Web Interface and System Diagnostics...
Page 2
Important Safety Instructions 1. Do not use this product near water. 2. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3. Do not install or place this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 3
Return Policy If you would like to return a Zigen product, it can be done within 30 days of purchase for a full refund, less shipping and handling. Zigen will not be responsible for shipping and handling of product returns. Returns will only be accepted of products with proof of purchase, products in the original packaging with zero to minimal use and a Return Merchandise Authorization RMA number provided by Zigen.
Page 4
Contacting Zigen Technical Support Tel: (818) 654-5252 Fax: (818) 654-5355 9:00AM - 5:00PM (PST) Email info@zigencorp.com www.zigencorp.com Mailing Address Zigen Corp. c/o Customer Service 6934 Canby Avenue Suite 107 Reseda CA 91335...
Page 5
Features • Three audio inputs can be switched: TOSLINK/COAX/Stereo. • Three audio synchronous outputs: TOSLINK, COAX & RCA (L+R). • The Transmitter is powered by the Receiver 12VDC by PoC technology. • The transmission distance of Stereo audio signal can reach up to 170m (557 ft.) over a single CAT-X cable, and the TOSLINK, COAX audio signal may be extended up to 290m (951ft.)
ZIG-PAX Introduction ZIG-PAX is an audio extender containing a Transmitter and a Receiver. It is designed to extend Stereo audio signal up to 170m (557 ft.), and TOSLINK, COAX audio signal up to 290m (951 ft.) via CAT-X cable.
ZIG-PAX Receiver Panel Description Receiver Front Panel OPTICAL: digital audio input port, connects to audio source. COAX: digital audio input port, connects to audio source. RCA (L+R): audio output port, connects to audio output device for playing. Receiver Back Panel FIRMWARE: Micro USB port for firmware update.