Lehle P-Split Ii As A Balanced/Unbalanced Signal Converter - Lehle P-Split II Operating Instructions Manual

Note:
In this case, the Lehle P-Split II is grounded via
the output of the soundcard or DAW.
It may, in some cases, be a good idea to connect
the ground to the other side, to eliminate interfer-
ence noise. To do this, simply swap the input (1)
and the ISO output (5).
The Lehle P-Split II as a balanced-to-un-
balanced signal converter
Device connection
Input (1)  Signal source (balanced
DIR output (2)  -
ISO output (5)  Signal input (balanced
or unbalanced)
or unbalanced)
17