Lehle P-Split Ii As A Re-Amplification Isolator - Lehle P-Split II Operating Instructions Manual

The Lehle P-Split II as a re-amplification
isolator
Once you've recorded the dry signal, it can be
fed through an amplifier during mixing; con-
necting the amp to the soundcard or DAW will
almost certainly generate a ground loop, causing
undesirable noise. This problem can be effectively
16
eliminated using the Lehle P-Split II. The built-in
Lehle LTHZ transformer electrically isolates the
ground connections, and functions perfectly with
both balanced and unbalanced signals from a
soundcard or a DAW.
Device connection
Input (1)  Soundcard / DAW
DIR output (2)  -
ISO output (5)  Amp
What to do:
1. Connect your soundcard or DAW to the input
socket (1) of the Lehle P-Split II.
2. Do not use the DIR socket (2).
3. Connect the ISO socket (5) to the input of your
amp.
4. Use the ground lift switch to determine which
position eliminates the most background noise.
5. There you go!