Springfree S 155 Assembly Instructions Manual page 8

5
NOTE - As you install the white mat rods into the mat rod sockets the net will become tight
against the frame. Handle the net with care and be sure that it does not get caught or it may
tear.
Find the hole in the net marked with a blue
a blue sticker.
Holding the net hole with the blue
Orient the net so that the blue
shown.
Put a white mat rod through the net hole and into the mat rod socket marked with the blue
Working around the frame, insert the remaining white mat rods through the net holes and into the
corresponding mat rod socket.
Be sure that the white mat rods are seated down to the bottom of each mat rod socket.
tag is facing you and is on the right hand side of the net hole as
SCAN HERE or visit http://springfr.ee/step-5 for a helpful installation demonstration video.
tag and the mat rod socket on the frame marked with
tag, place the rest of the net inside the frame as shown.
sticker.