Springfree S 155 Assembly Instructions Manual page 12

7
WARNING - Treat any loaded rod with caution until you are sure it is properly installed or
uninstalled. Keep your face well away from any loaded rod.
NOTE - When you have put the ball end of a white mat rod into a mat rod holder, swivel
the mat to ensure the white mat rod is correctly seated.
Attach the white mat rods to the left and to the right of the six initial starting rods, as shown above
with the blue and green squares.
Then, as shown by the above numbers, continue this sequence, one to the left and one to the right,
until all of the white mat rods are attached to the mat.