Final Procedure; Furnace & Air Conditioner Installation - Winchester WG SERIES Installation Instructions Manual

Winchester Gas Furnace
IF FURNACE FAILS TO OPERATE
PROPERLY:
1. Check setting on wall thermostat and the position of
the HEAT-COOL switch if air conditioning is installed.
2. Check to make sure that electrical power is on at the
furnace and the furnce breaker has not tripped.
3. Make sure that the lters are clean and return grills
are not obstructed. The supply registers should be
open.
Winchester by Mortex Products Inc. / Fort Worth, TX 76106
4. Be sure that the furnace ue and inlet piping has not
been obstructed and are open. If the cause for failure
is not obvious, do not attempt to service the furnace
yourself. Call a quali ed service agency or the gas
supplier.
WG Installation Instructions
Installation Instructions
12