Table of Contents
Advertisement
be cleared. You will need to obtain the
unique account number from the Central
Monitoring Station and re-program.
Command 20-24
Reporting Method
Commands (20-24) are used to program
the Alarm reporting method for each Tel.
Number.
Command (20): Program the same alarm
reporting method for all 4 Tel. Numbers.
Command (21-24): Program the alarm
reporting
method
Numbers respectively.
Available Options:
Function
Method
Selection
Digital
Reporting
Method
Voice
Message
Reporting
Method
Speech
Method
Factory Default for 1
(Command 22), and 4
Tel. # is set as (0), Contact ID.
Factory Default for 3
# is set as (4), Speech Method.
<
N
O
T
E
>
<
N
O
T
E
>
The latest Command (20-24) setting(s)
will overwrite any previously entered
setting(s).
If any of Digital Reporting Methods
is selected:
Once alarm or emergency data is
successfully transmitted, IC2020 will
automatically enter specific Follow-On
st
th
for
the
1
-4
(0)
Contact ID
(1)
Scancom
(2)
Tunstall
Play Voice
(3)
Message
Open Two-way
(4)
communication
st
(Command 21), 2
th
(Command 24)
rd
(Command 23) Tel.
and/or Call Back Mode as specified by
Command (38).
If
Methode is selected:
After the dialing for alarm/emergency
trigger is successful, IC2020 will play
the
Command #50) up to a max. length of
40 seconds. IC2020 will emit a beep
via the telephone handset, signaling
20 & 10 sec of time remaining to alert
the call Recipient.
While playing the voice message,
pressing the DTMF key can enter the
following mode for 10 minutes:
DTMF #1: enter Talk mode (only
Tel.
the Call Recipient talks).
DTMF
communication mode.
DTMF #3: enter listen-in mode.
During the 10 min period, IC2020 will
emit a beep via the telephone handset
signaling 20 & 10 sec of time
remaining to alert to the call Recipient.
If the Call Recipient needs more
conversation time, press the DTMF
key (1, 2 or 3) again to add another 10
minutes.
To terminate the call, press DTMF (9)
or NURSE button on IC2020. IC2020
will start a 10-minute waiting period to
auto answer any incoming phone call.
During the voice message playing
period, if there is no any DTMF key
pressed, the call will automatically
hang-up and be recorded as an
unsuccessful call. It will retry up to a
nd
maximum of 4 times on each Tel.
Number accordingly.
If Speech Method is selected:
After the dialing for alarm/emergency
trigger is successful, IC2020 opens a
two-way
between
IC2020 for 1-60 minutes (set by
Command #46).
If the Call Recipient needs more talk
time, s/he can press any keys except
9 on their phone set to add another 1-
60 minutes (set by Command #46).
To terminate the call, press (9) or
11
Voice
Message
pre-recorded
message
#2:
enter
voice
communication
the
Call
Recipient
Reporting
(see
two-way
and
Advertisement
Table of Contents
