Subscribe to Our Youtube Channel
Related Manuals for Wyred 4 Sound MC 7150
Summary of Contents for Wyred 4 Sound MC 7150
- Page 1 Wyred 4 Sound MC 7150 MC 7150 Owner’s Manual **IMPORTANT** Check position of AC mains switch prior to connecting the unit to a power source ©Wyred 4 Sound 2013 All rights reserved. v1.1...
-
Page 2: Table Of Contents
Table of Contents Register Your Product READ FIRST Important Package Contents Introduction Design and Feature Overview AC Mains Voltage Switch Getting Connected Powering your Integrated Amplifier “Break-In” Period DC Trigger Back Panel Diagram Troubleshooting Got Hum? Warranty Coverage Service Specifications... -
Page 3: Register Your Product
Please read the entire manual before connecting this product to any existing components for detailed information regarding the design, operation and features of your Wyred 4 Sound MC 7150. Damage due to misuse or failure to properly follow instructions will not be covered under warranty. See “Warranty” for an in depth understanding of warranty restrictions regarding this product. -
Page 4: Introduction
Design and Feature Overview The MC 7150 is a high performance multi-channel amp in a package that is attractive, functional and powerful. With over 90% efficiency, Class D technology has allowed us to develop and amp that will effectively enhance your music and movie experience! In addition to having a more “Green”... -
Page 5: Ac Mains Voltage Switch
AC Mains Voltage switch Located on the left side of the rear panel is an AC mains switch. The MC 7150 will need to be unplugged and powered down for at least 2 minutes before changing the 2 position slider switch. -
Page 6: Powering Your Integrated Amplifier
Powering your amplifier In order to turn the main power of the MC 7150 on, the switch located on the rear must be in the “on” position. A green light surrounding the power button on the front will illuminate. There is a built in 2 second delay after initially turning the switch on in the rear of the unit before you can press the power button. -
Page 7: Back Panel Diagram
1. Verify that the power cord is securely plugged into the wall and the MC 7150. 2. Make sure that the Voltage Selector Switch is in the proper position. Also be sure to check the fuse which is located in the IEC inlet fuse holder. -
Page 8: Got Hum
7. Verify that the interconnects are working by replacing them with a different set from a connection that you know works. If these cables were used in the current setup and the only component that has changed is the MC 7150 continue to the next step. -
Page 9: Warranty Coverage
If a hardware defect arises and a valid claim is received within the Warranty Period, at its option, Wyred 4 Sound will either (1) repair the hardware defect at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product. -
Page 10: Obtaining Warranty Service
Service Provider will help determine whether your product requires service and if it does, they will inform you how Wyred 4 Sound will provide it. Wyred 4 Sound or its Authorized Service Providers will provide warranty service on products that are tendered or presented for service during the Warranty Period, as permitted by law. -
Page 11: Service
Service Department have been made in advance. Proof of purchase from an authorized Wyred 4 Sound dealer, distributor or agent will be required for warranty validation at the time of hand delivery. Use the original packaging to ensure the safe transit of the product to the factory, dealer, or distributor. -
Page 12: Specifications
Frequency Response 20Hz--20kHz (8 ohms) ± 0.027db Unbalanced Input Impedance 61.9k Dynamic Range 106db Gain 30db Sensitivity 1.15V Min Load 4Ω Idle power consumption <10W Standby power consumption <0.5W Wyred 4 Sound PH: 805-466-9973 Fx: 805-462-8962 Email: support@wyred4sound.com pg. 10...
Need help?
Do you have a question about the MC 7150 and is the answer not in the manual?
Questions and answers