Wyred 4 Sound audio products are designed to bring you closer to the beauty of your music. Our goal is to bring the performance of the recording right into your home with as little change as possible. As you can identify, our drive is focused on the customer.
This allows for all volume controls to be made through the surround processor. When the processor is shut down, so is the STI. When 2ch listening is desired, then manual operation can be executed from the front of the unit, or through the remote.
Leaving your amplifier on all the time will not hurt it, shorten the lifespan, or degrade the future sound. The STI series amplifiers make zero noise internally and to connected gear. The unit shouldn’t be in any way noticeable of its operation other than the display status on the front panel.
The binding posts that you will find on the STI series are made of nothing but the best. Each binding post is made of highly ductile “OFC” copper alloy. Both clamping nuts are built out of one piece, and offers excellent grip.
F-connectors that you can pass a signal through. When the amplifier faults, there will be no indication other than the lack of music. The STI series amplifiers are very robust and can handle the heaviest of loads. Under normal circumstances, there shouldn’t be any issues with faulting.
Wyred 4 Sound's property. Parts provided by Wyred 4 Sound in fulfillment of its warranty obligation must be used in products for which warranty service is claimed. When a refund is given, the product for which the refund is provided must be returned to Wyred 4 Sound and becomes Wyred 4 Sound's property.
A Wyred 4 Sound representative or Wyred 4 Sound Authorized Service Provider will help determine whether your product requires service and, if it does, will inform you how Wyred 4 Sound will provide it. Wyred 4 Sound or its Wyred 4 Sound Authorized Service Providers will provide warranty service on products that are tendered or presented for service during the Warranty Period, as permitted by law.
Page 10
Voltage changes to match your country’s voltage and frequency requirements to your Wyred 4 Sound product are possible only at the time of purchase. The STI series amplifiers are set to a fixed voltage to match your country’s requirements and may not be easily changed.
Need help?
Do you have a question about the STI and is the answer not in the manual?
Questions and answers