Improvising With The Preset Patterns - Casio LK-130ES User Manual

Table of Contents

Advertisement

IMPORTANT!
• If you play one or two notes only in the left hand, or three
notes that do not make up a recognizable chord formation,
no sound will be produced. The DIGITACIÓN
(FINGERED) mode requires a conventional three or four-
note chord formation to produce an auto-accompaniment.
Also, note that auto-chords only work in conjunction with
rhythm patterns, and not independently of them.
❚ NOTE
• The above examples show only one of the possible fingerings
for each chord. Note that you can play the notes that form a
chord in any combination. Each of the following fingerings for
example, produces the same C chord.
Accompaniment
keyboard
• See the "Fingered Chord Charts" on page A-3 for
information on the fingerings of chords for all roots.
To play a DIGITACIÓN (FINGERED) auto-
accompaniment
1.
Use the ALIMENTACIÓN/MODO (POWER/
MODE) selector to select DIGITACIÓN
(FINGERED).
2.
Select an auto-rhythm as described under "To
select and play a rhythm" on page EN-17.
3.
Start play of the rhythm.
• If you want to start play of the normal rhythm pattern,
press INICIO/PARADA (START/STOP).
• You can also use synchro start (on this page) to start
rhythm play.
4.
Play a chord on the accompaniment keyboard
to start play of the auto-accompaniment.
Chord name
5.
Continue pressing keys on the accompaniment
keyboard to play your chord progression.
6.
To stop auto-accompaniment play, press the
INICIO/PARADA (START/STOP) button again.

Improvising with the preset patterns

Pressing the INICIO/PARADA (START/STOP) button to start
rhythm play causes the normal version of the pattern to be
played. You can also play a variation of the rhythm using the
operation described below.
Using fill-in rhythm
You can insert a fill-in rhythm by pressing the SINCRO/
RELLENO (SYNCHRO/FILL-IN) button while an auto-
rhythm plays.
Using Synchro start
You can start the rhythm and accompaniment pattern at the
same time, with your play of the accompaniment keyboard.
To do this, follow the steps below.
1.
Set the ALIMENTACIÓN/MODO (POWER/
MODE) selector to the ACORDES CASIO (CASIO
CHORD) or DIGITACIÓN (FINGERED) position.
2.
Select an auto-rhythm.
3.
Press the SINCRO/RELLENO (SYNCHRO/FILL-
IN) button.
4.
Press the accompaniment keys to play the first
chord. As soon as you do, the auto-
accompaniment pattern begins to play.
5.
To stop the auto-accompaniment pattern play,
press the INICIO/PARADA (START/STOP) button.
❚ NOTE
• If you set the ALIMENTACIÓN/MODO (POWER/MODE)
selector to NORMAL in step 1 on page EN-17, the operation in
step 4 starts play of the rhythm (percussion instruments) only.
EN-19

Advertisement

Table of Contents
loading

Table of Contents