Travis Industries Xtreme 6020 Owner's Manual page 10

10
Continuous Pilot
THIS FIREPLACE SHOULD NOT BE RUN IN CONTINUOUS PILOT. THIS MAY LEAD
TO PREMATURE BLOWER FAILURE AND/OR COLD AIR INFILTRATION INTO THE
FIREPLACE. IF "CONTINUOUS PILOT" APPEARS ON THE LCD SCREEN, FOLLOW
THE DIRECTIONS BELOW TO TURN OFF THIS FEATURE.
Turning Off Continuous Pilot
With the remote in the off position (thermostat off, manual off), follow the directions below to adjust the
pilot mode to "Intermittent Pilot".
NOTE: This icon appears
when the appliance is in
CPI mode.
© Travis Industries
Operation
F
Press the "UP" button
to activate CPI mode.
F
Figure 4
4140328
Press the "MODE" button
when the appliance is off to
adjust the IPI/CPI.
Press the "DOWN" button
to activate IPI mode.
F
100-01352