Accessories - Craftsman 139.53663SRT Owner's Manual

139.53702
Emergency Key Release:
Required for a garage with NO access
door. Enables homeowner to open
garage door manually from outside by
disengaging trolley.
139.53703 Outdoor Key Switch:
Operates the garage door
automatically from outside when
remote control is not handy.
139.53404 8 Foot Rail Extension
To allow an 8 foot door to open fully.
53885
Support Brackets:
For finished ceilings or where
additional support is required, based
on garage construction.
Includes brackets and fastening
hardware.
Door Clearance Brackets:
139.53709
(For Sectional Doors Only)
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage with low headroom clearance.
We recommend that you program your password before
you install the Keyless Entry. You will not need
assistance, and you can test the reception at the
mounting location before installation.
If you have a Premium Control Console:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
Accessories Available For Your Opener
To Add the Keyless Entry
139.53681 SECURITY 3-Function Remote
Control:
Includes visor clip.
SECURITY Compact 3-Function
139.53680
Remote Control:
With loop for attaching key ring.
(Available April 1997)
139.53684 SECURITY Keyless Entry:
Enables homeowner to operate garage
door opener from outside by entering
a password. Also can add a temporary
password for visitors or service
persons. This temporary password
can be limited to a programmable
number of hours or entries.
139.53686
Plug-In Light Control:
Enables homeowner to turn on a lamp,
television or other appliance from car,
bedside, or anywhere in the home
with a remote. Available April 1997.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from 0 to 9 (a
number can be used more than once, for example, 4, 0,
4, 1).
2. Press the four buttons for the password, then press and
hold the Enter button. The indicator light on the door
opener panel will blink.
3. Press and release the SRT (learn) button on the opener
panel. After the opener light flashes, release the Enter
button.
Test by pressing the password, then press Enter. The door
should begin to move.
38