Load And Remove A Wireless Sensor - BolyGuard BG30L User Manual

BG30

4.18 Load and remove a wireless sensor

Any 433MHz wireless sensor, such as infrared body sensor,
wireless door magnet, wireless smoke detector etc. can be set as an
alarm sensor of the camera.
Method to load or remove a wireless sensor:
1. Power on the wireless sensor;
2. Enter the Setting Status, press LEFT button and enter the
study code menu. Choose Zone1 or Zone2,press OK button, then
trigger the wireless sensor to check if the sensor is loaded
successfully . When it's successful, there will be a "*"before zone1
or zone2
Setting Status
3. When you want to remove the wireless sensor. Please enter
the study code menu, press LEFT button to cancel the "*". If there
is not a "*" before the zone, it means the sensor has been removed
from the camera.
4 Basic use and settings
Study Code Menu Study Code Menu
24