Table of Contents
Advertisement
BG30
.
4.6 Set MMS parameters
If you want get instant MMS images when the camera is
triggered, you should set the MMS parameters correctly.
Method1: Send SMS command:
#M#URL#IP#Port#APN#Account#Password#
The following chart shows the meaning of each field. Please
note there is a "#" between each field. Please don't forget the
character "#" at the end of the command.
Please note each field has a max. character number limit.
If success, reply SMS: http://mmsc.monternet.com,
10.0.0.172,
13800138000, , , ,
If fail, reply SMS: Command error. Please check again!
Method2: Reedit the profile.txt in the computer to set the MMS
parameters, below is for reference:
4 Basic use and settings
80,
cmwap,
name,
password,
15
Advertisement
Table of Contents
