Table of Contents
Advertisement
BG30
4.1 Mount the camera
Camera can be mounted on a wall or put down on any suitable
horizontal surface.
1)According to base board installing hole space, make holes on
the wall with a power drill.
2)Fix base board with the host by connecting screw hole.
3)Press "
positioning.
4.2 Three camera status
From the basic operations of the camera in previous chapter,
we know that the camera has three basic operation status:
Setting Status: You can change or check camera settings in
this status. You can also But via SMS, you can change or check
settings in any status.
Arm Status: It's the work status. When there is a motion
trigger, the camera will take photo and send the picture to your
phone or mailbox.
（There are 3 ways the camera will react when it's triggered:
Only insert TF card: After take photos and it just stores
4 Basic use and settings
4 Basic use and settings
"button to open the laser pointer for helping
12
Advertisement
Table of Contents
