Advertisement
KNOW YOUR COFFEE MAKER
(Product may be subject to minor design change without prior notice)
BEFORE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the inner workings of the coffee
machine with warm water as follows:
1. Pour water into the water tank. The water level should not exceed the "MAX" mark in the
tank, then replace the water tank cover.
Note: The appliance is supplied with a detachable tank for easy cleaning. You can fill the
tank with water firstly, then put the tank into the appliance.
2. Set coffee powder mesh into the metal funnel (no coffee in the mesh).
3. Insert the funnel into the appliance from the "Insert" position and release the press bar. You
can then fix them into the coffee maker firmly by turning it anticlockwise until it is in the
LOCK position.
4. Place a jug on the removable shelf. Make sure the steam control knob is on the minimum
position.
Note: The appliance is not equipped with a jug. Please use your own jug or coffee cup.
5. Connect to a power source, then the "On/Off" switch to the "-" position. The power indicator
will be illuminated.
6. Turn the coffee switch to the "-" position. The pump will begin to pump water, and when
there is water flowing out, turn the coffee switch to the "O" position and turn the steam
switch to the "O" position. After a moment, the appliance will begin to pre-heat, at which
point the ready indicator will illuminate, showing that the pre-heating is complete. Turn the
coffee switch to the "I" position again, and water will flow out.
7. Once the water stops flowing out, you can pour the water in the containers out and clean
them thoroughly. You are now ready to start brewing!
Note: There may be a noise when pumping the water for the first time. This is normal, as
the appliance is releasing internal air. After about 20s, the noise will disappear.
A: On/Off switch
B: Steam switch
C: Coffee switch
D: Steam control knob
E: Water tank cover
F: Water tank
G: Top cover
H: Steam wand water tank
I: Froth device
J: Main body
K: Removable shelf
L: Coffee powder mesh
M: Metal funnel
N: Bottom cover
O: Metal funnel handle
P: Measuring spoon and tamper
Q: Power indicator
R: Ready indicator
Advertisement
