Rinnai Infinity 20e Installation And User Manual page 44

Infinity 20e
Note 1: The default factory setting is 55° C for Infinity 20e. The unit can be ordered
from Rinnai to be pre-set to any of the other temperatures listed. The unit can be pre-set to any of the
temperatures listed by a suitably qualified person.
Controllers are available with default temperatures up to 75º C. When fitted with controllers, only temperatures
not exceeding the default temperatures can be selected. When fitted without controllers, the unit will deliver
water at the default temperature.
Service Manual Infinity 16e and 20e Service Manual Infinity 16e and 20e
REU-V1616W/REU-V2018W/REU-V2020W - 3 - Issue 1 - 4/12/03 ©Rinnai