Tenda W300D User Manual page 63

manually configuring IP address and other network parameters for
multiple computers in LAN.
Enable/ Disable DHCP Server: Click the corresponding button to
enable/ disable the DHCP Server.
Start IP: The point from which DHCP server starts IP address
distribution.
End IP: The point where DHCP server ends IP address
distribution.
Lease Time: It indicates the valid time of the dynamic IP address,
which is distributed to the client's host computer by DHCP server.
During this time, the server will not distribute the IP address to any
other host computer.
Note:
To use the Router's DHCP server function, you must set the
TCP/IP protocol of the computers in LAN to "Obtain an IP address
automatically".
DHCP client
This page displays DHCP client's information such as host name, MAC
address, IP address, and lease time.
- 63 -
ADSL2/2+ Router