Notices; Japanese Vcci Notice; Industry Canada Compliance Statement; Safety Information - Lexmark Z51 User Manual

apply, the limitations or exclusions
contained in this statement may not
apply to you.
This warranty gives you specific
legal rights. You may also have other
rights which vary from state to state.

Notices

Federal Communications
Commission (FCC)
Compliance Information
Statement
The Lexmark Z51 Color Jetprinter
has been tested and found to comply
with the limits for a Class B digital
device, pursuant to Part 15 of the
FCC Rules. Operation is subject to
the following two conditions: (1) this
device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
The FCC Class B limits are designed
to provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses and can
radiate radio frequency energy and,
if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between
the equipment and receiver.
54
Appendix
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult your point of purchase
or service representative for
additional suggestions.
The manufacturer is not responsible
for any radio or television
interference caused by using other
than recommended cables or by
unauthorized changes or
modifications to this equipment.
Unauthorized changes or
modifications could void the user's
authority to operate this equipment.
To assure compliance with FCC
regulations on electromagnetic
interference for a Class B computing
device, use a properly shielded and
grounded cable such as Lexmark
part number 1329605. Use of a
substitute cable not properly
shielded and grounded may result in
a violation of FCC regulations.
Any questions regarding this
compliance information statement
should be directed to:
Director of Lab Operations
Lexmark International, Inc.
740 New Circle Road NW
Lexington, KY 40550
(606) 232-3000
Industry Canada
Compliance Statement
This Class B digital apparatus meets
all requirements of the Canadian
Interference-Causing Equipment
Regulations.
Avis de conformité aux
normes d'Industrie
Canada
Cet appareil numérique de la classe
B respecte toutes les exigences du
Règlement sur le matériel brouilleur
du Canada.
European Community
(EC) directives conformity
This product is in conformity with
the protection requirements of EC
Council directives 89/336/EEC and
73/23/EEC on the approximation
and harmonization of the laws of the
Member States relating to
electromagnetic compatibility and
safety of electrical equipment
designed for use within certain
voltage limits.
A declaration of conformity with the
requirements of the Directive has
been signed by the Director of
Manufacturing and Technical
Support, Lexmark International,
S.A., Boigny, France.
This product satisfies the Class B
limits of EN 55022 and safety
requirements of EN 60950.

Japanese VCCI notice

The United Kingdom
Telecommunications Act
1984
This apparatus is approved under the
approval number NS/G/1234/J/
100003 for the indirect connections
to the public telecommunications
systems in the United Kingdom.

Safety information

• If your power supply fails, replace it with
the Lexmark replacement part or other
UL LISTED Direct Plug-In Power Unit
marked "Class 2" and rated 30 Vdc at
830 mA.
• If your product is NOT marked with this
symbol , it MUST be connected to
an electrical outlet that is properly
grounded.
• The power cord must be connected to an
electrical outlet that is near the product
and easily accessible.
• Refer service or repairs, other than those
described in the operating instructions, to
a professional service person.