Lexmark Z51 User Manual page 15

Procedure 1
The most common way to change properties for the current print job
is through the application in which you are working. Although this
procedure may vary between applications, general instructions are as
follows:
1
From your application's File menu, select
Note: In some applications this might be called
Destination
application's user documentation for more specific
information about how to specify or change printer
setup options.
2
Click the Job Properties
notebook appears.
Note: In some applications this might be called
Options. You should refer to your application's user
documentation for more specific information about
how to specify or change printer setup options.
3
Change settings as needed.
Procedure 2
You can also set Job Properties to control various system printing
functions, such as print screen, drag and drop printing, and printing
from OS/2 Windows and full screens. Follow the steps as shown to
access Job Properties from the printer icon for this type of printing.
Using OS/2 Version 2.1, 2.11, or OS/2 Warp Version 3.0
1
Right-click the Printer
A sidebar menu appears.
2
If you are using:
• OS/2 Warp Version 3.0, click Settings.
• OS/2 Version 2.1 or 2.11, click Open, and click Settings.
3
Click the Printer driver
Printer
or Print Setup. Refer to your
push button. The Job Properties
icon on your desktop.
tab.
Using the printer software
Setup.
Print
Settings or
11