Other Functions; Regarding Progressive Scan Output - Pioneer PRV-LX1 Operating Instructions Manual

Other Functions

The Function Menu's SET UP section =
[Operation] = [Video Settings] = [Test Signal]
command can be used to output a test pattern
signal. To turn off the test pattern, press the STOP
button or the FUNCTION button, or if a mouse is
connected, click both right and left buttons
simultaneously.
SET UP section = [Operation] = [Video Settings]
= [Test Signal]

Regarding Progressive Scan Output

This unit allows the output of progressive scan video
signals from the component output connector. To
turn progressive scan output ON/OFF, press the
controls on the front panel:
Press these buttons simultaneously.
Note 1:
Switching is not possible during disc playback.
Note 2:
Be sure the unit is connected to a television monitor
supporting progressive-scan. Proper image
reproduction will not be produced with other
monitors.
Note 3:
When progressive output is ON, image signals will
not be produced from output connectors other than
the component output connector.
Note 4:
Some progressive scan monitors currently available
do not possess complete compatibility with the PRV-
LX1, with the result that some image distortion may
occur. If such distortion is observed during
progressive scan playback, set the PRV-LX1's output
to interlaced.
Playing Discs
49
PRV-LX1
En