Clip Playback (Hdd); Basic Operations - Pioneer PRV-LX1 Operating Instructions Manual

Playing Discs
When a DVD disc has been set for fast play, follow
the instructions to begin playback automatically upon
insertion of the disc. When "DVD1" or "DVD1&2"
is designated, "DVD1" is used. To playback discs on
drive 2, "DVD2" must be designated as the playback
source. During playback, controls on the front panel
and remote control unit act to navigate the DVD in
accordance with the disc's commands.

Clip Playback (HDD)

When the "HDD" is designated as the playback
source, the PLAY button on the front panel or
remote control unit is used to playback designated
project clips in the order in which they were
recorded. Press the STOP button on the front panel
or remote control unit to end playback.
STOP
REPEAT DISPLAY
RPT A-B
AUDIO
ANGLE SUBTITLE
MENU
TOP
MENU
SETUP
1 2
4 5
7 8
>
0 10
42
PRV-LX1
En
PLAY
PAUSE
STEP
SCAN
PREV NEXT
ENTER
3 RETURN
TITLE/CHP
6
FRM/TIME
9
FRM/TIME
CLEAR
SEARCH

Basic Operations

7 Operations on the Menu Screen
Some DVD-Video discs are equipped with menu
(selection screen) functions. To select desired titles
and tracks from the menu, use the PRV-LX1's
CURSOR button to select, and the ENTER button
to confirm the selection.
7 To return to the menu screen during playback
TOP
Press the button.
MENU
Also, if the MENU button is pressed, the menu screen
within the current title will appear.
7 To advance to the next chapter/title
Press the main unit's SCAN/SKIP FWD button, or
the remote control unit's NEXT
advance immediately to the beginning of the next
chapter or title.
7 To go back to previous chapter/title
Press the main unit's SCAN/SKIP REV button, or
the remote control unit's PREV
the beginning of the currently playing chapter; press
additional times to return to the beginning of previous
chapters. When multiple titles exist on the disc and
this command is executed within the first chapter of
title, playback will return to the top chapter of the title
immediately preceding the current one.
7 Fast Forward
Hold depressed the main unit's SCAN/SKIP FWD
button, or the remote control unit's
Release the button when near the desired point.
If the remote control unit's
released once, playback will enter continuous fast
forward mode. Press the
PLAY
with to resume normal playback.
7 Fast Reverse
Hold depressed the main unit's SCAN/SKIP REV
button, or the remote control unit's
Release the button when near the desired point.
If the remote control unit's
released once, playback will enter continuous fast
reverse mode. Press the PLAY
with to resume normal playback.
button; the playback will
button once to return to
SCAN button.
SCAN button is pressed and
button at the point you
SCAN button.
SCAN button is pressed and
button at the point you