Caring For Your Iron; Dry Ironing - T-Fal Ultimate Autoclean Operation Instruction Manual

1800114214 FTH Q0:1800114214 FTH Q0
8. 3 way Auto Shut-Off safety feature (depending on model)
- For your safety, the electronic system cuts off the power and the
Auto Shut-Off indicator light flashes
• The iron remains motionless for more than 8 minutes on its heel.
• The iron remains flat or on its side for more than 30 seconds.
- To restart the iron, just move it gently until the warning light stops
flashing.
9. Autoclean Catalys
- Your iron is equipped with a self-cleaning soleplate
works through catalysis action.
- This exclusive coating helps continuously eliminate all the impurities
generated by normal use. It is recommended that you always stand
your iron on his heel to preserve its self-cleaning coating.
- Choose your ironing program.
- Set the steam control to DRY
- You may start ironing when the thermostat light goes out.

Caring for your iron

BE CAREFUL ! Unplug your iron and let it cool down before cleaning it.
Cleaning the anti-calc valve (once per month)
- Unplug your iron and empty the water tank.
- To remove the antiscale valve, set your thermostat on the position MAX
place the steam control on STEAM , and the valve can now be removed from
- fig. 15
your iron
- Soak the valve in a cup of white vinegar or plain lemon juice for 4 hours
- Rinse the valve under running water.
- Replace the anti-calc valve.
The iron will not function
without the anti-calc valve
1. Self-cleaning
In order to extend the life of your iron, use the Self-Cleaning
function once a month.
- Set the iron to DRY
- Fill the water tank to maximum.
- Set the iron on his heel, with the water tank full, and set the
thermostat to MAX
- When the thermostat light goes out, unplug the iron and hold it in a
horizontal position, over a sink.
- Remove the anti-calc valve.
8
- fig. 13
®
Soleplate
- fig. 1
.
.
Never touch the end of the valve
.
- fig. 10 .
20/04/09 14:56
When the
Auto Shut-Off
when : warning light is
on, it is normal for
the thermostat
light to remain
off.
- fig. 14
which

Dry Ironing

- fig. 16
Recommendations:
the self-cleaning
function helps to
slow down the
scaling up of your
iron.
Page 8
- fig. 10
,
.