Table of Contents
Advertisement
Table 3.1: Basic Explanation
Field Name
Beep After Scan OK
Scan Timeout
Termination Code
Continuous Scan
Keybd Message
Prefix
Suffix
Default
F/W ver.
Set All To Default
Function Explanation
Select the number of beep tones after a suc-
cessful scan.
After scanning the barcode, do
None
not beep.
After scanning the barcode,
One Time
beep once.
After scanning the barcode,
Two Times
beep twice.
Select the scanning timeout duration (in sec-
onds) from this pull-down list.
2 ~ 20 seconds. Default: 5 seconds
After showing barcode, do not
None
action.
After showing the barcode,
CRLF
jump to the next row.
After showing the barcode,
Space
jump one unit.
After showing the barcode,
Tab
jump a section.
Disable
Disable this functionality.
The duration of a continuous
1 ~ 5 sec
scan.
Select a method based upon the barcode scan-
ning application you will use.
A unit follows a unit, quickly
Type Writing
showing the barcode number.
Show the barcode number
Copy & Paste
once.
Type the desired label prefix in this text box.
Type the desired label suffix in this text box.
Press the "Default" button to reset all settings of
the "Basic" Tab to default values.
Decoder firmware version.
Press the "Set All To Default" button to reset all
settings of the "Basic" tab, "Code Configure"
tab, "Code ID" tab and all barcodes of "Barcode
Setup" to default values.
57
Chapter 3
Advertisement
Table of Contents
