Table of Contents
Advertisement
b)
Place the spare battery pack into the Single Cradle's spare Battery
charging slot.
1.
Connect the power cord to the power adapter.
2.
Connect the power cord to a power source.
3.
Plug the connector of the power adapter into the Single Cradle.
4.
Insert the battery pack into the Single Cradle's spare Battery slot.
When charging the battery pack, the charge indicator on the PDT turns
Red. After the battery pack is fully charged, the indicator turns Green.
CAUTION: If the battery pack is removed from the PDT for too
long, the data stored inside the SDRAM will be lost. Switch off the
PDT if you want to change the main battery pack.
23
Chapter 2
Advertisement
Table of Contents
