Table of Contents
Advertisement
Rodgers 538/i548
Data management functions
(6) Choose "Memory Set" with the Select knob.
(7) Connect your USB storage device to the 538/i548's
USB port (below the data entry wheel).
If you forget to do this, the following message
appears when you execute step (8).
(8) Confirm your choice by pressing [QUICK¥MENU].
(9) Use the Select knob to select the "Memory Set" file
you want to load.
Be aware that this will overwrite the 538/i548's
internal general and divisional memories. You may
want to save the internal settings to your USB
storage device before proceeding (page 55).
(10) Press the [+] piston to load the settings.
(11) Press and hold the [ø¥EXIT] piston to return to the
main page.
Loading general or MIDI parameter
sets
"GeneralParam" and "MIDI Parameters" sets you saved
to a USB storage device (see pages 42 and 54) can be
loaded into the 538/i548 again to replace the settings
currently contained in the organ's internal memory.
Again, it would be a good idea to save the settings
currently contained in the 538/i548's internal memory
to a USB storage device before proceeding.
(1) Press [QUICK¥MENU].
(2) Use the Select knob to select "Memory Setup".
(3) Confirm your choice by pressing [QUICK¥MENU].
This takes you to a lower level with several options.
56
(4) Use the Select knob to select "Parameter Load".
(5) Confirm your choice by pressing [QUICK¥MENU].
This takes you to a lower level with several options.
(6) Choose "MIDI Parameters" (see above) or "General-
Param" with the Select knob.
This choice depends on whether you want to load
MIDI or general settings.
(7) Connect your USB storage device to the 538/i548's
USB port (below the data entry wheel).
(8) Confirm your choice by pressing [QUICK¥MENU].
(9) Use the Select knob to select the file you want to
load.
Be aware that this will overwrite the 538/i548's
internal settings of the selected section. You may
want to save the internal settings to your USB
storage device before proceeding.
(10) Press the [+] piston to load the settings.
(11) Press and hold the [ø¥EXIT] piston to return to the
main page.
Advertisement
Table of Contents
