Security functions
Configuring and using SmartCard reader
a = PC card slot with SmartCard Interface
b = SmartCard holder
c = SmartCard
Installing and removing SmartCard holder
To use the SmartCard reader, you must install a SmartCard holder in your notebook. The
SmartCard holder is contained in the "Mobile Secure IT Suite", which is either included with your
notebook or is available as an accessory depending on the configuration.
Ê
Gently slide the SmartCard holder into the slot until you feel it click into place (1).
To remove the SmartCard holder, proceed exactly as with a PC card. Please see the illustration and
the instructions in the section "Working with PC cards".
Do not use force when installing and removing the SmartCard holder.
!
Make sure that foreign objects do not fall into the SmartCard holder.
56
b
2
c
a
1
a + b = SmartCard reader
A26391-K121-Z120-2-7619