Table of Contents
Advertisement
2.1 Foreword
Before any repair service, you should check:
a) Whether the dishwasher is properly installed according to the installation manual.
b) Whether the damaged components have been repaired or not.
c) Whether the charging hose and the drain hose are properly installed.
d) Whether the dishwasher is level or not.
e) Whether there is salt in the water softener.
f) Whether there is rinse agent in the dispenser.
The circuit board is the centrum of the whole control system of the dishwasher. When dishwasher is
washing though a information comes to the circuit, then the circuit delivers various dictate to
every department of dishwasher to keep the dishwasher moving. the dishwasher move with a
arranged program. If you know the program and structure of the dishwasher, the below table shoule
be helpful to establish a resolve to any problems occurred.
2.2 Troubleshooting
Questions put forward by users
The dishwasher does not start
Water floods in the dishwasher
The dishwasher does not heat
No water comes into the dishwasher * Water supply is cut off
By misusage of users
* Something wrong with the socket
* No water (the water valve is closed)
* Improper electrical connection
* The door is not properly closed
* Incorrect position of charging hose
* The filter of the water inlet valve is
clogged.
3
The problems of the dishwasher itself
The problems of the dishwasher itself
* Power cord
* "ON/OFF" switch
* Door switch
* Water inlet valve
* Pressure switch
* Aqua-stop switch
* Air leakage of the chamber
* Air leakage of the chamber
* The hose of pressure switch
* The hose of pressure switch
* Pressure switch
* Pressure switch
* Water inlet valve
* Water inlet valve
* Malfunction of heating element
* The circuit is not properly contacted
* Malfunction of the thermocouple
* Connection to the inlet valve is
broken or damaged.
* Electrical connection is cut off.
* Pressure switch
* Aqua-stop switch
* The softener is blocked.
Hide quick links:
Advertisement
Table of Contents
