Wind Noise Reduction Function; Anti-Ground-Shooting (Ags) - Panasonic NV-GS300 Operating Instructions Manual

Start recording. (fade in)
When you start recording, the image/audio
disappeared completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
ª
To cancel fading
Select the [ ] icon again.
≥The [FADE OFF] indication appears on the
screen of the movie camera.
ª
To select the colour for fade in/out
The colour which appears in fading pictures can
be selected.
1
Set [ADVANCED] >> [FADE COLOUR] >>
[WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it
takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.

Wind noise reduction function

This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
Record mode
ª
To cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)

Anti-Ground-Shooting (AGS)

This function prevents unnecessary recording
when you forget to pause recording and walk with
the camera tilted upside down while recording
continues.
≥If the movie camera continues to be tilted
upside down from the normal horizontal position
while recording on a tape, it is automatically put
into recording pause.
AGS: Anti-Ground-Shooting
≥Set to Tape Recording Mode.
1
Set [SETUP] >> [AGS] >> [ON].
ª
To cancel Anti-Ground-Shooting
Set [SETUP] >> [AGS] >> [OFF].
≥
The AGS function may activate and cause
the movie camera to pause the recording if
you are recording a subject right above or
right below you. In these cases, set
[OFF] then continue the recording.
≥
Use the Recording start/stop button to pause
or stop the recording. The AGS function is
only a backup function for when you forget to
pause the recording.
≥The time it takes the camera to be put into
recording pause after being tilted upside down
varies depending on the operating conditions.
[AGS] >>
31
VQT0T16