Functions Cannot Be Used Simultaneously - Panasonic NV-GS300 Operating Instructions Manual

CHANGE TO 0.2M/0.3M MODE:
When continuous photoshot is used, set
[PICTURE SIZE] to [
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] button (
This may solve the problem.
CHANGE MODE TO USE USB:
The USB cable is connected to the movie
camera in Card Recording Mode.
DISCONNECT USB CABLE:
You are attempting to turn the mode dial in
PC Connection Mode with the USB cable
connected to the movie camera. You are
attempting to record pictures on a tape/card
with the USB cable connected to the movie
camera.
NO INK IN PRINTER:
There is no ink. Check the connected
printer.
NO PAPER IN PRINTER:
There is no paper. Check the connected
printer.
PRINTER ERROR:
Check the connected printer.
PC DOES NOT SUPPORT USB2.0:
The movie camera is connected to a
personal computer that does not support
USB 2.0. (Refer to the operating
instructions for PC connection.)
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
At the time of 0 Lux colour night view mode,
when LCD monitor is not reversed, it
displays. When the LCD monitor is rotated
by 180° towards the lens, the brightness of
the LCD monitor cannot be adjusted.
Others
] or [ ].
0.2 0.3
M
).
-6-
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Digital zoom ≥When the Card Recording
≥Fade
≥Backlight ≥When the colour night
compensation
≥When the iris/gain is set
≥Help mode ≥While recording to a tape
≥Recording
check
≥Blank search
≥Soft skin
≥Tele macro
≥Colour Night ≥While recording to a tape
≥When the Card Recording
View
≥Continuous ≥When [PICTURE SIZE] is
Photoshot
≥Video flash ≥While recording to a tape
≥During demo mode
≥When continuous
≥When the colour night
≥Zoom ≥An external microphone is
microphone
≥Wind noise
reduction
≥Scene mode ≥When setting the [AUTO/
≥When the colour night
≥Change of ≥When digital zoom (10k
white balance
≥When the colour night
≥Adjusting the ≥When the colour night
shutter speed,
≥When the scene mode is
iris/gain
mode is used
view function is used
mode is used
set to other than [
0.2
[ ]
0.3
M
photoshot is used
view function is used
used
MANUAL/FOCUS] switch
to [AUTO]
view function is used
or higher) is used
view function is used
view function is used
used
VQT0T16
] or
55