Datalogic Gryphon I GBT4400 2D Quick Reference Manual page 18

General purpose handheld area imager bar code reader with bluetooth wireless technology
Hide thumbs Also See for Gryphon I GBT4400 2D:
Table of Contents

Advertisement

Charging the Batteries
WARNING
CAUTION
CAUTION
14
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and negative
terminal of the battery pack to each other with any
metal object (such as wire).
• Do not carry or store the battery pack together with
metal objects.
• Do not pierce the battery pack with nails, strike it
with a hammer, step on it or otherwise subject it to
strong impacts or shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or allow
the battery to get wet.
• Do not apply voltages to the battery pack contacts.
In the event the battery pack leaks and the fluid gets into
your eye, do not rub the eye. Rinse well with water and
immediately seek medical care. If left untreated, the bat-
tery fluid could cause damage to the eye.
Always charge the battery at 32° – 104°F (0° - 40°C) tem-
perature range.
Use only the authorized power supplies, battery pack,
chargers, and docks supplied by your Datalogic reseller.
The use of any other power supplies can damage the
device and void your warranty.
Do not disassemble or modify the battery. The battery
contains safety and protection devices, which, if dam-
aged, may cause the battery to generate heat, explode or
ignite.
Do not place the battery in or near fire, on stoves or other
high temperature locations.
Do not place the battery in direct sunlight, or use or store
the battery inside cars in hot weather. Doing so may cause
the battery to generate heat, explode or ignite. Using the
battery in this manner may also result in a loss of perfor-
mance and a shortened life expectancy.
Gryphon™ I GBT4400 2D

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents