Selecting An Input Signal - 3M MP7650 Operator's Manual

3M™ Multimedia Projector MP7650/7750

Selecting an Input Signal

Using the remote control
5
If selecting RGB input
Press the RGB button
Press this button to toggle between the
devices connected to RGB IN 1 and 2.
As illustrated below, each time you
press the RGB button, the projector
switches between RGB IN 1 and 2.
Select the signal you wish to project.
RGB
RGB IN 1
If selecting video input
Press the VIDEO button
Press this button to toggle between the
devices connected to VIDEO IN, S-
VIDEO IN and COMPONENT VIDEO. As
illustrated below, each time you press
the VIDEO button, the projector
switches between VIDEO IN, S-VIDEO
IN and COMPONENT VIDEO. Select the
signal you wish to project.
VIDEO IN
VIDEO
Use the zoom ring to adjust the
6
screen size
Use the focus ring to focus the
7
picture
RGB IN 2
S-VIDEO IN
COMPONENT VIDEO
© 3M 2002. All Rights Reserved.
Using the projector's control panel
Press the INPUT button
As illustrated below, each time you
press the INPUT button, the projector
switches between its input signal
ports. Select the signal you wish to
project.
INPUT
RGB IN 1 RGB IN 2
COMPONENT VIDEO
VIDEO IN
S-VIDEO IN
15