Turning On The Power - 3M MP7650 Operator's Manual

3M™ Multimedia Projector MP7650/7750

TURNING ON THE POWER

Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
STANDBY/ON
VIDEO RGB SEARCH
ASPECT AUTO BLANK
HOME PAGE UP VOLUME
MAGNIFY
ON
END PAGE DOWN MUTE
OFF
FREEZE KEYSTONE
Control panel
STANDBY/ON INPUT KEYSTONE RESET
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
14
Make sure that the power cord is firmly and
1
correctly connected to the projector and outlet
Turn on the projector's power
2
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the POWER indicator will light to
solid orange.
LANP
TENP
POWER
POWER indicator
Press the STANDBY/ON button (control
3
panel or remote control)
• The projector begins warming up and the POWER
indicator blinks green.
• The POWER indicator stops blinking
and lights to solid green once the
projector's power is completely on.
Remove the lens cap
4
The picture is projected.
© 3M 2002. All Rights Reserved.
power switch
STANDBY/ON