Table of Contents
Advertisement
3M™ Multimedia Projector MP7650/7750
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
Function
RGB input
RGB output
USB mouse control
PS/2 mouse control
ADB mouse control
Serial mouse control
RS-232C communication
S-video input
Video input
Component video input
Audio input
NOTE
About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB
IN 2 port if Plug-and-Play does not function correctly.
Projector Port
RGB IN 1
RGB IN 2
RGB OUT
USB
CONTROL
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO Y
COMPONENT VIDEO C
/P
B
B
COMPONENT VIDEO C
/P
R
R
AUDIO IN L
AUDIO IN R
© 3M 2002. All Rights Reserved.
Connection Cables
RGB cable with D-sub 15-pin shrink jack
and inch thread screws
USB cable
PS/2 mouse cable
ADB mouse cable
Serial mouse cable
RS-232C cable
S-video cable with mini DIN 4-pin jack
Audio/video cable
Component video cable
Audio/video cable
or Audio cable with RCA jack
9
Advertisement
Table of Contents
