Inserting Batteries Into The Remote Control - AOC T2442e User Manual

Buttons located on the right hand side of the TV operate the same way as these buttons on the remote control.

Inserting batteries into the remote control

Insert two "AAA" batteries (supplied) into the removed control as shown in the diagram.
Button D escription
Press this button to turn the TV on and off. When the TV is turned
off, it will enter the energy-saving mode instead of disconnecting the
Power button
power unless the AC supply is turned off or the power cord is
unplugged from the outlet.
TV/Video/HDMIP
Press this button to directly launch to the corresponding mode,
C/Component including TV/Video/HDMIPC/Component.
Press the 0-9 buttons to select a channel. After pressing the number,
0-9
the TV will switch to that channel in about 2 seconds.
- / --
Press the 0-9 buttons and this button to select a channel with 3 digits.
Press this button to return to the previous channel or exit from the
Return OSD (On Screen Display) menu when displaying the menu items or
settings.
Volume Press this button to adjust volume .
Source Press this button to display the input source list.
Press this button to mute the sound. Press the button again or the
Mute
Volume button (
Press this button to scan channels. Press
Program
from one channel to another.
Press the arrow buttons to select an item or adjust the settings in the
/ / /
OSD function menu .
OK
Press this button to select or confirm an item or setting.
Press this button repeatedly to toggle from one display mode to
another. In general, there are Wide, 4:3, Zoom-in 1, Zoom-in 2,
Zoom
Movie 1, and Movie 2 modes. In the HDMI mode, no display mode
is available. In the PC mode, only 4:3 and Wide are available.
Press this button to display various hotkey functions and function
Menu menu hotkeys. The items in the OSD function menu vary according
to the input mode and contents.
Press this button to display
Display program, if any. The OSD will disappear in a few seconds. Press
the button again to turn off the display.
Press this button repeatedly to toggle from one picture mode to
another, including Standard, Vivid, Movie, Energy-saving and
Picture
Custom. The picture mode is also adjustable from the screen settings.
Refer to Screen Settings in p. 20.
Press this button repeatedly to toggle from one sound mode to
Sound another, including Standard, Music, Voice and Custom. The sound
mode is also available from the Sound Settings in p.22.
Press this button to select the time to turn off the TV (ineffective in
Sleep the PC mode). The sleep timer is also available from the OSD. Refer
to Screen Settings in the TV function menu.
10
) to restore sound.
to quickly change
the information of the channel or