Suitable for water (potable) heating and space heating (28 pages)
Summary of Contents for AquaStar 2700 ES
Page 1
Outdoor Kit Installation Instructions Aquastar Tankless Water Heater For Aquastar models: 2400 ES, 2700 ES Part no. AQOK Warning: This kit must be installed by a qualified installer in accordance with these instructions and all applicable codes and requirements of the...
Warning Warning Selecting heater location Before proceeding, read the water heater instructions Danger: The top of the outdoor kit will manual. If the information in that manual is not followed get very hot during operation. Keep exactly, a fire, explosion or poisoning by carbon away from children.
Page 3
Installing outdoor kit Installing outdoor kit B 1. Remove the cover plate (A) installed on the top of the appliance, as shown in Fig. 2. B 2. Fix the supports (B) to the appliance by fastening the four provided screws, as shown in Fig. 2. Fig.
Page 4
Installing outdoor kit B Replace the control panel shield with shield provided in kit, see Fig. 6. Fig. 6 Warning: The control panel shield must always remain closed, except when making adjustments, to prevent damage from weather. NOTE: Once this kit is installed, the outdoor vent cap will need to be removed first, before taking the front cover off of the appliance.
Mounting instructions Mounting instructions B The water heater is approved for installation directly on an outside wall. Secure the wall mounting bracket provided with the water heater to a wall surface. See Fig. 7. B The installation method of the mounting bracket will depend on what type of surface it’s being mounted on.
Page 6
Measuring carbon dioxide (CO2) Measuring carbon dioxide Warning: Outdoor vent cap will get very hot during operation. B Ensure the vent cap is cool before performing the procedure below. B To measure CO on this appliance, a measuring port is available under the louvered grill on the front of the outdoor vent cap.