Troubleshooting Aurora Ls; Chassis Status Indicators - Rorke Data Galaxy Aurora LS Series Configuration And Setup

G A L A X Y ® A U R O U R A

4.0 Troubleshooting Aurora LS

This section contains typical types of common errors a list of common error messages and
their meanings as well as corresponding tips on how to resolve the underlying problem. If your
error message is not listed here please contact Aurora LS support and service team (see
section "help" above). Our staff will help you find a solution.
Rorke Technical Support email support is available at techsupport@rorke.com or is available
9am-5pm five days a week by phone at 800 328 8147.
4.1

Chassis Status Indicators

The front of the Aurora LS has some indicators that can help determine basic problems with
the unit.
Next to the front operator panel Power and Reset switches is the Power LED. This illuminates
when power is on. Next to the power LED is the Aurora LS OS DOM activity LED for the
internal boot drive. This LED will light intermittently during normal operation. Next to the DOM
LED are two network LEDs. These LEDs will light when there is activity from the ports they
correspond to on the rear. Next to these is a temperature warning LED. If the temperature
inside the system becomes too high, this LED will illuminate. Next to the temperature warning
LED is a power supply / fail warning LED. If there is something wrong with the power, this LED
will illuminate.
75
L S C O N F I G U R A T I O N
Front Operator Panel
A N D S Y S T E M I N T E G R A T I O N
Troubleshooting Guide
Section 4 Troubleshooting Guide
G U I D E
Section 4