Installing Fibre Channel Hba And Drivers On Aurora Ls Clients - Rorke Data Galaxy Aurora LS Series Configuration And Setup

G A L A X Y ® A U R O U R A
Setup the
IP address to :192.168.1.2
Subnet mask to : 255.255.255.0
Default gateway to: blank
DNS server info should be blank.
Clik OK and your client can now see the Aurora LS over Ethernet using as standard Internet
Browser.
The Aurora LS has been setup with a fixed default IP address of :
192.168.1.129

2.2.2 Installing Fibre Channel HBA and drivers on Aurora LS Clients

Consult with your local Aurora LS reseller for Windows, Linux, and Apple client HBA
information.
Go to the various Linux, Windows, or Apple File system preparation section of this manual to
prepare the Aurora LS LUN for your clients.
27
L S C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
Section 2 Basic Setup