Teatronics Lighting Controls PROCON II Owner's Manual page 6

T E AT R O N I C S L I G H T I N G C O N T R O L S , I N C . T E AT R O N I C S L I G H T I N G C O N T R O L S ,
SETUP AND CONNECTION (continued)
XLR CONTROL CABLES - WARRIOR
Connection to the controller is very simple. It requires one 4-channel cable for every four
channels of dimming.
In use with Warrior dimmers, connect one cable to each 4-channel console output and the other
end to a Warrior. A glowing Light Emitting Diode (LED) on the console will show that it is
receiving power. Repeat the connections for each group of four channels on the console.
PROCON II
Lighting Control Console
I N C .
12/01/94
Page//
3