Adjustments - Teatronics Lighting Controls PROCON II Owner's Manual

T E AT R O N I C S L I G H T I N G C O N T R O L S , I N C . T E AT R O N I C S L I G H T I N G C O N T R O L S ,
The Procon II console has an internal adjustment to set the control voltage at the high end of the
slide pot travel. This adjustment is usually factory set for zero to ten volt operation. If other
than zero to ten volt operation is desired (and was not specified when the console was ordered)
the adjustment may be altered to yield the correct control voltage, so long as the control voltage
falls within the limits of the Procon II's circuitry. Any voltage from 9.1 to 12.6 may be obtained
at the Procon II's outputs.
PROCON II
Lighting Control Console

ADJUSTMENTS

I N C .
12/01/94
Page// 8