Administration
Time Settings
To set the idle session timeout of an HTTP or HTTPS session:
STEP 1
STEP 2
STEP 3
Time Settings
See
Administration: Time
System Log
See
Administration: System
File Management
See
Administration: File
Rebooting the Device
Some configuration changes, such as enabling jumbo frame support, require the system to be rebooted
before they take effect. However, rebooting the device deletes the Running Configuration, so it is critical
that the Running Configuration is saved to the Startup Configuration before the device is rebooted. Clicking
Apply does not save the configuration to the Startup Configuration. For more information on files and file
types, see the
System Files
You can back up the device configuration by using
Configuration
or clicking Save at the top of the window. You can also upload the configuration from a
remote device. See the
Cisco Small Business 200 Series Smart Switch Administration Guide
Click Administration > Idle Session Timeout.
Select the timeout for the each session from the corresponding list. The default
timeout value is 10 minutes.
Click Apply to set the configuration settings on the device.
Settings.
Log.
Management.
section.
Download/Backup Configuration/Log
Administration > File Management > Copy/Save
section.
6
62