Cisco Small Business 200 Series Administration Manual page 101

Administration: Discovery
Configuring LLDP
• Device Class—LLDP-MED endpoint device class. The possible device classes are:
- Endpoint Class 1—Indicates a generic endpoint class, offering basic LLDP services.
- Endpoint Class 2—Indicates a media endpoint class, offering media streaming capabilities as well
as all Class 1 features.
- Endpoint Class 3—Indicates a communications device class, offering all Class 1 and Class 2
features plus location, 911, Layer 2 switch support and device information management
capabilities.
• PoE Device Type—Port PoE type, for example, powered.
• PoE Power Source—Port's power source.
• PoE Power Priority—Port's power priority.
• PoE Power Value—Port's power value.
• Hardware Revision –Hardware version.
• Firmware Revision—Firmware version.
• Software Revision—Software version.
• Serial Number—Device serial number.
• Manufacturer Name—Device manufacturer name.
• Model Name—Device model name.
• Asset ID—Asset ID.
802. 1 VLAN and Protocol
• PVID—Advertised port VLAN ID.
PPVIDs
PPVID Table
• VID—Protocol VLAN ID.
• Supported—Supported Port and Protocol VLAN IDs.
• Enabled—Enabled Port and Protocol VLAN IDs.
Cisco Small Business 200 Series Smart Switch Administration Guide
9
100